HappyLiner FL-0019 Vented Liner 19mm suitable for Lely milking robot

HappyLiner FL-0019 Vented Liner 19mm suitable for Lely milking robot.

• Rubber liners 19mm
  
• Fits the long cups (C cup) of Lely
• High quality rubber
• Interchangeable with the original Lely liners
• For 2500 milkings
• Improved head of the liner.
• Rounded head for better fit and less air intake
• Sold per set of 4 pieces
  
• WITH HEAD VENTILATION
• Can also be used in combination with the FL-0021 Vented

Step-by-step plan HappyLiner Vented

With the HappyLiner with head ventilation, it is important that the hole at the bottom is sealed. Here is the step-by-step plan:

• Seal the hole in the stainless steel section under the cup, the stainless steel milk collection section;
• Clean and dry the hole;
• Press the silicone plug a little way into the hole, +/- 5mm;
• Cut off the remaining protruding part of the plug with a sharp knife;
• Using a blunt object (for example an Allen key), press the silicone plug into the hole until it will not go any further, so that the plug sits recessed in the hole of the stainless steel milk collection section.
• It is also advisable to check the pulsation settings in T4C.

The standard settings are:

• 60 pulses per minute
• 43 kPa
• 65 / 35 suction/rest ratio