HappyLiner FL-0019 Vented Liner 19mm suitable for Lely milking robot

HappyLiner FL-0019 Vented Liner 19mm suitable for Lely milking robot.

• Rubber liners 19mm
  
• Fits in the long cups of Lely
• High quality rubber
• Interchangeable with the original Lely liners
• For 2500 milkings
• Improved liner head.
• Dome-shaped head for better attachment and less air ingress
• Sold per set of 4 pieces
  
• WITH HEAD VENTING
• Can also be used in combination with the FL-0021 Vented

Step-by-step guide HappyLiner Vented

With the HappyLiner with head venting, it is important that the hole at the bottom is sealed. The step-by-step guide:

• Seal the hole in the stainless steel section below the cup, the stainless steel milk collection section;
• Clean and dry the hole;
• Press the silicone plug a little into the hole, +/- 5mm;
• Cut off the remaining protruding part of the plug with a sharp knife;
• Press the silicone plug into the hole with a blunt object (for example an Allen key) until it goes no further, so that the plug sits recessed in the hole of the stainless steel milk collection section.
• It is also advisable to check the pulsation settings in T4C.

The default settings are:

• 60 strokes per minute
• 43 kpa
• 65 / 35 suck/rest ratio